Henan Liangzhong Pipe Industry Co., Ltd.

KYP eccentric reducing rubber joint

KYP eccentric reducing rubber joints are improved on the basis of KXT rubber joints, which can solve the problem of different diameters and different pipes when connecting metal pipes. Eccentric reducing rubber joints can solve the problem of different diameters when connecting metal pipes, and at the same time have the effect of reducing vibration and noise, saving pipe installation parts and saving costs. It consists of inner rubber layer, fabric reinforcement layer, middle rubber layer, outer rubber layer

Product advantages

1. The eccentric size head of the pipeline or pump valve is used to prevent cavitation, and the size head of the pump inlet should generally be installed flat. This is to prevent gas in the pipeline from accumulating at the pump port, forming large bubbles into the pump cavity, and damaging the pump. . Only one case can be installed at the bottom. That is the elbow that is bent upwards directly behind the big and small heads. In this case, the gas phase is unlikely to accumulate.

2. Pump-pipe installation reducing joint: There is a difference between the pump outlet and the outer piping system. It is used for reducing heads and can realize the linear connection of two pipes of different sizes.

The lateral displacement of the eccentric reducing rubber joint is the displacement of the rubber joint in the direction perpendicular to the direction of the fluid, that is, the direction of the central axis.

The angular displacement of the eccentric reducing rubber joint is: the sum of the angles between the vertical centerline of the two end faces of the rubber joint and the original central axis


Features

First align the joint flange with the position of the reserved flange hole of the corresponding pipeline, then pass the fixing screw through the flange hole, and lock the nut with a wrench.

1. This product can greatly reduce the vibration and noise of the pipeline system, and can fundamentally solve the problems of various pipeline joint displacement, axial expansion and contraction, and out of center.

2. According to different materials, it can be made into various varieties such as acid resistance, alkali resistance, corrosion resistance, oil resistance, high temperature resistance, etc., to adapt to a variety of media and environments.

3. The material is polar rubber, with good sealing performance, light weight, convenient installation and maintenance, and long service life, but avoid contact with sharp metal instruments to avoid puncturing the sphere.

4. For overhead use, it can be equipped with an elastic bracket, and the bolts should be tightened diagonally during installation.

5. If the pipeline pressure is too high, use limit bolts to connect the two flanges together.

6. The flange connection standard adopts the GB/T9115.1-2000 standard, if other standards are used, it can be stated separately. The working pressure of this product is divided into 0.6MPa and 1.0MPa.

7. The normal applicable medium for rubber joints is ordinary water at a temperature of 0-60°C. For special mediums such as oil, acid, alkali, high temperature and other corrosive and hard texture conditions, rubber made of corresponding special materials should be used. Connectors, can not be used blindly in series or universal


  • Product alias:Oil-resistant rubber joints, rubber joints for hydraulic pipes

Products Recommended